Sale
UV-36HA
The UV-36HA unit uses a height adjustable rack and coats both flexible and rigid substrates up to 1″ (26mm) thickness.

The machines are designed for easy operation and are modular for easy maintenance. They do not require special operator skills. Available in 36” (91.5 cm) coating width, the units provide high speed, dry to dry protective lamination for photographs and digital ink-jet images printed with various types of inks (including UV, solvent or aqueous).

Coating speed can be varied up to 50 feet per minute (12m/minute). Coating thickness can be adjusted from 3 to 10 microns. The built in liquid circulation system uses three pumps each with its own reservoir and filtration system: one for glossy lacquer, one for matte (or luster) lacquer and one for cleaning fluid.
Sale
Roll-to-Roll
The ATC roll to roll machine is designed for rolls up to 10″/25.4cm diameter. The operating range of this unit is from 35 fpm/11 mpm to 70/21.5 (feet per minute/metres per minute)

The exact capture method varies with different materials. The feeding method is always the same: material is fed through the raised rollers of the coater until 18″/0.46m to 24″/0,61m of material is on the dryer transport belt. The coater rollers are lowered to zero, starting the coating process. Roll material is transported through the dryer, off the end of the dryer and into the automatic roll take up. Any roll material that can be fastened with adhesive tape can be run in this machine.
Sale
UV60-1TS & UV80-2TS
ATC – XL UV60-1TS and UV80-2TS Liquid Coating Systems

ATC introduces the latest advance in coating machine technology. The XL machines are designed for professional, heavy duty operation, specifically for the flatbed printer market. Available in both 60”/1.6m and 80”/2.0m effective coating widths, the units provide high speed, dry to dry protective lamination for digital ink-jet images printed with various types of inks including UV, solvent, and water-based.

The units coat both flexible and rigid substrates up to 3”/ 75mm thickness. They feature super sized rollers to assure precise, full width, edge to edge coating with a speed range from 30 ft /9m to 110 ft /34m per minute. All three rollers are motorized for precise coating control. Coating thickness is adjustable from 0.3 to 0.8 mil. The built in triple liquid delivery system handles two liquids and a cleaning fluid. All three liquids are filtered. The liquid metering roller and bottom roller scraper are pneumatically controlled.
Sale
UV-24 & UV-24HA
The ATC UV-24 Cyclone is an offline, sheet-fed liquid coating system that produces a high-quality finish on a wide variety of inks, toners, and substrates. This low-maintenance, easy-to-use system allows for effective coating of printed media at a very low average cost.

An adjustable metering system and independent roller speed controls allow the operator to adjust coating thickness with ease. the user-friendly 3-tank coating & wash system provides for an easy switch from one coating finish to another within minutes.

The ATC UV-24 Cyclone coating technology is ideal for protecting and enhancing output materials from digital and photo printers, off-set printers and lithopresses. This efficient system is great for photo book applications as well as finishing brochures & mailers, greeting & trading cards, decals and more!

The ATC-UV24 Cyclone is available in a height-adjustable (HA) model, ideal for protecting and enhancing output materials printed on (or mounted on) rigid substrates up to one inch thick, such as styrene, chloroplast, corrugated materials, foam board, metals and other printable products.
Sale
UV-60 & UV-80
The ATC coating machines are designed specifically for the flatbed printer market. Avail in both 60″ and 80″ coating width, the units provide high speed, dry to dry protective lamination for digital ink-jet images printed with various types of inks including UV, Solvent, and Water-based.

The units coat both flexible and rigid substrates up to 3″ thickness. They feature super sized rollers to assure precise, full width, edge to edge coating with a speed range from 30 to 110 feet per minute. Coating thickness is adjustable from 0.3 to 0.8 mm. The built in triple liquid delivery system handles two liquids and a cleaning fluid. All three liquids are filtered. The liquid metering roller and bottom roller scraper are pneumatically controlled. The machines also feature an ingenious, 9 nozzle air separator system to allow light weight materials to be coated without sticking problems.